Categorías
Lo más vendido
Ref.: 164.0103A34F AEROSOL ENFRIADOR /NIEVE LIQUIDA/FREEZING (400ML)
Ref.: 161.1309/1.5.10CABLE HDMI MACHO-MACHO 19PIN 1.5MT V:1.4 ETHERNET
Ref.: 104.NTC10D20NTC 10D20 TERMISTOR 10 OHMS, 6 AMP. DIAMETRO: 20MM
Ref.: 196.LIA200LIA200 AMPLIFICADOR INTERIOR 2 SALIDAS UHF/VHF 24DB LTE (EDISION)
Ref.: 161.CSS8SEPARADOR PCB PLASTICO LARGO: 8MM ADHESIVO
Ref.: 104.R02/1KRESISTENCIA CARBON AXIAL 6MM 0.25W 1K
Ref.: 108.CP9003EC11 ENCODER CON PULSADOR DE CODIGO/POTENCIOMETRO DIGITAL 5PIN 20MM
Ref.: 100.L7805CVL7805CV REGULADOR +5V, 1.5A, TO220 (ST)
Ref.: 199.1105/2.1ALIMENTADOR ELECTRONICO 12V/2AMP/24W C:5.5X2.1MM
Ref.: 165.0063/13ON-ON SW FINAL DE CARRERA 10A,250VAC L:13MM SPDT3P
Ref. 108.KS0049
SENSOR DE HUMEDAD PARA ARDUINO/FUNDUINO
Stock: 233 Ref. 108.KS0049
Precio (IVA incluido) 0,787 €
| Unidades | ≥ 20 | ≥ 40 | ≥ 60 | ≥ 80 | ≥ 100 |
| DescuentoDescuentoprecio | -3%-0,0240,763 | -5%-0,0390,747 | -7%-0,0550,731 | -10%-0,0790,708 | -15%-0,1180,669 |
Specification
Power Supply Voltage: 3.3V or 5V
Working Current: ≤ 20mA
Output Voltage: 0-2.3V (When the sensor is totally immersed in water, the voltage will be 2.3V) 5V power supply，the higher humidity, the higher the output voltage
Packaging : Electrostatic bag sealing
Sensor type: Analog output
Interface definition: Pin1- signal, pin2- GND, pin3 - VCC
Service life: About one year (gold-plated surface for enhancing conductivity and corrosion resistance )
Module size: 20X60mm
Sample code
/*
# Example code for the moisture sensor
# Connect the sensor to the A0(Analog 0) pin on the Arduino board
# the sensor value description
# 0 ~300 dry soil
# 300~700 humid soil
# 700~950 in water
*/
void setup(){
Serial.begin(57600);
}
void loop(){
Serial.print("Moisture Sensor Value:");
Serial.println(analogRead(0));
delay(100);
}
Power Supply Voltage: 3.3V or 5V
Working Current: ≤ 20mA
Output Voltage: 0-2.3V (When the sensor is totally immersed in water, the voltage will be 2.3V) 5V power supply，the higher humidity, the higher the output voltage
Packaging : Electrostatic bag sealing
Sensor type: Analog output
Interface definition: Pin1- signal, pin2- GND, pin3 - VCC
Service life: About one year (gold-plated surface for enhancing conductivity and corrosion resistance )
Module size: 20X60mm
Sample code
/*
# Example code for the moisture sensor
# Connect the sensor to the A0(Analog 0) pin on the Arduino board
# the sensor value description
# 0 ~300 dry soil
# 300~700 humid soil
# 700~950 in water
*/
void setup(){
Serial.begin(57600);
}
void loop(){
Serial.print("Moisture Sensor Value:");
Serial.println(analogRead(0));
delay(100);
}
